 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CPC1030N 4-Pin SOP OptoMOS(R) Relay Parameter Blocking Voltage Load Current Max On-resistance Rating 350 120 30 Units VP mA Features * Small 4-Pin SOP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 1500Vrms Input/Output Isolation * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Tape & Reel Version Available Description The CPC1030N is a miniature single-pole, normally open (1-Form-A) solid state relay in a 4-Pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input/output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS architecture. The optically coupled output is controlled by a highly efficient GaAIAs infrared LED. The CPC1030N uses Clare's state of the art double-molded vertical construction packaging to produce one of the world's smallest relays. The CPC1030N offers board space savings of at least 20% over the competitor's larger 4-Pin SOP relay. Approvals * UL Recognized Component: File # E76270 * EN/IEC 60950-1 Compliant * CSA Certified Component: Certificate # 1172007 Ordering Information Part # CPC1030N CPC1030NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Pin Configuration + Control 1 4 Load - Control 2 3 Load Switching Characteristics of Normally Open (Form A) Devices Control ILOAD + 90% 10%+ tOFF tON Pb RoHS 2002/95/EC e3 www.clare.com 1 DS-CPC1030N-R12 CPC1030N Absolute Maximum Ratings (@ 25C) Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 350 5 50 1 70 400 1500 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / C Electrical Characteristics Parameter Output Characteristics @ 25C Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25C Input Control Current 3 Input Dropout Current Input Voltage Drop Reverse Input Current Input/Output Characteristics @ 25C Capacitance Input to Output 1 2 3 Conditions Symbol Min Typ Max Units t=10ms IL=120mA VL=350V IF=5mA, VL=10V 50V; f=1MHz IL=120mA IF=5mA VR=5V - IL ILPK RON ILEAK tON tOFF COUT IF IF VF IR - 0.3 0.9 - 25 25 0.85 0.6 1.2 1 120 350 30 1 2 1 2 1.4 10 - mA A ms pF mA mA V A pF Load current derates linearly from 120mA @ 25oC to 80mA @85oC. Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60oC) an LED drive current of 4mA is recommended. 2 www.clare.com R12 CPC1030N PERFORMANCE DATA* Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) Typical On-Resistance Distribution (N=50, IF=2mA, IL=120mA, TA=25C) 35 30 Device Count (N) 23.5 24 24.5 25 25.5 On-Resistance () 26 26.5 25 20 15 10 5 0 370 375 380 385 390 395 Blocking Voltage (VP) 400 35 30 Device Count (N) 35 30 Device Count (N) 25 20 15 10 5 0 Typical Blocking Voltage Distribution (N=50, TA=25C) 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 25 20 15 10 5 0 Typical IF for Switch Operation (N=50, IL=120mA, TA=25C) 25 20 15 10 5 0 Typical IF for Switch Dropout (N=50, IL=120mA, TA=25C) 25 20 15 10 5 0 Typical Turn-On Time (N=50, IF=5mA, IL=120mA, TA=25C) Device Count (N) Device Count (N) 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.45 0.50 LED Current (mA) 0.55 0.60 0.65 0.70 LED Current (mA) 0.75 Device Count (N) 0.50 0.60 0.70 0.80 0.90 Turn-On (ms) 1.00 1.10 25 20 15 10 5 0 Typical Turn-Off Time (N=50, IF=5mA, IL=120mA, TA=25C) Load Current (mA) Typical Load Current vs. Temperature 180 160 140 120 100 80 60 40 20 0 Leakage (A) 0.016 0.014 0.012 0.010 0.008 0.006 0.004 0.002 -40 -20 0 20 40 60 80 Temperature (C) 100 120 0 -40 Typical Leakage vs. Temperature Measured Across Pins 3 & 4 (VL=350V) Device Count (N) I F =10mA I F =5mA 0.21 0.22 0.23 0.24 0.25 0.26 0.27 -20 0 20 40 60 80 100 Turn-Off (ms) Temperature (C) Typical Blocking Voltage vs. Temperature 400 Blocking Voltage (VP) 395 Turn-On (ms) 390 385 380 375 370 365 -40 -20 0 20 40 60 80 100 Temperature (C) 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 -40 Typical Turn-On vs. Temperature (IL=80mA) I F = 5mA I F = 10mA -20 0 20 40 60 80 100 Temperature (C) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -40 Typical Turn-Off vs. Temperature (IL=80mA) Turn-Off (ms) I F = 10mA I F = 5mA -20 0 20 40 60 Temperature (C) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R12 www.clare.com 3 CPC1030N PERFORMANCE DATA* Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 Turn-On (ms) 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 Temperature (C) 100 120 I F = 50mA I F = 30mA I F = 20mA I F = 10mA I F = 5mA 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Typical Turn-On vs. LED Forward Current (IL=120mA, TA=25C) 1.4 1.2 Turn-Off (ms) 0 5 10 15 20 25 30 35 40 45 50 1.0 0.8 0.6 0.4 0.2 0 Typical Turn-Off vs. LED Forward Current (IL=120mA, TA=25C) 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) LED Forward Current (mA) 60 50 On-Resistance () 40 30 20 10 0 Typical On-Resistance vs. Temperature (IF=10mA, IL=80mA) 3.0 2.5 LED Current (mA) 2.0 1.5 1.0 0.5 0 -40 Typical IF for Switch Operation vs. Temperature (IL=80mA) 3.0 2.5 LED Current (mA) 2.0 1.5 1.0 0.5 0 Typical IF for Switch Dropout vs. Temperature (IL=80mA) -40 -20 0 20 40 60 Temperature (C) 80 100 -20 0 20 40 60 Temperature (C) 80 100 -40 -20 0 20 40 60 Temperature (C) 80 100 150 100 Load Current (mA) 50 0 -50 -100 -150 Typical Load Current vs. Load Voltage (IF=5mA, TA=25C) Energy Rating Curve 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms Time Load Current (A) -3 -2 -1 0 1 2 3 1s 10s 100s Load Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R12 CPC1030N MANUFACTURING INFORMATION Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 4-Pin SOP Package 4.089 0.203 (0.161 0.008) 0.200 0.025 (0.008 0.001) Pb RoHS 2002/95/EC e3 Recommended PCB Land Pattern 0.60 (0.0217) 3.810 0.076 (0.150 0.003) Pin 1 2.54 Typ (0.100 Typ) 2.184 Max (0.086 Max) 6.096 0.102 (0.240 0.004) 1.02 0.025 (0.040 0.001) 0.432 0.127 (0.017 0.005) 1.30 (0.0512) 2.54 (0.10) 5.60 (0.2205) 0.0254 - 0.102 (0.001 - 0.004) 0.381 TYP. (0.015 TYP.) Dimensions mm (inches) Tape and Reel Packaging for 4-Pin SOP Package 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 Max (0.472 Max) B0=4.70 (0.185) Pin 1 K0=2.70 (0.106) K1=2.30 (0.091) Embossed Carrier P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches) Embossment NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1030N-R12 (c)Copyright 2009, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 3/9/09 5 |
Price & Availability of CPC1030N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |